We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn More
EUR - Euro
USD - US Dollar
WORLDS BEST RUGGED CASES
WORLDWIDE SHIPPING
ONLINE 24/7
PRICE MATCH PROMISE
NANUK 909 Rugged Case For Dji Mavic Mini
This compact, yet ultra-durable, case features pre-cut protective foam to protect your DJI™ Mavic Mini drone.
909-DJI-MM Features
- Impact Resistant Protective Case
- Made From NK-7 Resin Material
- Waterproof & Dustproof
- Lightweight & Compact
- PowerClaw Latching System
£113.67
Manufacturer: Nanuk
Availabilty: 5-7 Days
£113.67
Built to organize, protect, carry and survive tough conditions, the NANUK 909 waterproof hard case is impenetrable and indestructible with a lightweight tough NK-7 resin shell and PowerClaw superior latching system. With NANUK’s exclusive locking and latching system, your case stays shut and secured until you are ready to open it.
This compact, yet ultra-durable, case features pre-cut protective foam to protect your DJI™ Mavic Mini drone.
It offers custom compartmentalized protection for the aircraft, remote controller, and charging accessories. The interior of the lid features soft, cushioned foam to keep the contents firmly in place when the case is being transported. Photographers, videographers, drone pilots and enthusiasts trust NANUK to protect their most valuable gear.
The NANUK 909 For DJI™ Mavic Mini protective case comes with a soft grip and ergonomic handle to make it easy to transport.
It also features stainless steel hardware and integrated handle stay to keep the handle out of harm when travelling or during shipping. This transport case is also equipped with an automatic pressure release valve and an integrated bezel system to accommodate custom panels without needing to drill holes so the case stays watertight.
This MIL-Spec injection moulded case is backed by a lifetime warranty.
| Manufacturer | Nanuk |
|---|---|
| IP Rating | IP67 |
| Housing Colour | Black, Silver, Graphite, Olive, Yellow, Orange, Lime |
| Certifications | Waterproof IPX7, Dustproof IP6X, ATA 300-CAT 1, ASTM D-4169-DC-18 (Drop, Vibration & Rainfall), MIL-STD-810F(Imersion), RoHs |
| Operating Temperature | Min -20 Degrees F (-29 Degrees C ) Max 140 Degrees F (60 Degrees C) |
| Storage Temperature | Min -20 Degrees F (-29 Degrees C ) Max 140 Degrees F (60 Degrees C) |
| Shock | ASTM D-4169 DC-18 - VIBRATION |
| Dimensions | L12.64" x W9.0" x H4.38"L321mm x W229mm x H111mm |
| Warranty | Conditional Lifetime Guarantee |
| Series | SMALL |
| Interior Dimensions (L x W x H) | L11.4" x W7.0" H3.68"L291mm x W178mm H93mm |
| Exterior dimensions (L x W x H) | L12.64" x W9.0" x H4.38"L321mm x W229mm x H111mm |
| Lid Depth | 1.3" | 33mm |
| Base Depth | 2.4" | 60mm |
| Case Material | NK-7 Resin |
| Internal Volume | 0.18 cu.ft (5.2 L) |
| Max Buoyancy | 10 lb | 4.5 kg |
| Temperature Rating | Min -20 Degrees F (-29 Degrees C ) Max 140 Degrees F (60 Degrees C) |
| Water Resistant | Yes, Water Resistant (IP67) |
| Airline Check-in | Yes |
| Airline Cabin Carry-on | Yes |
- Impact Resistant Protective Case
- Made From NK-7 Resin Material
- Waterproof & Dustproof
- Lightweight & Compact
- PowerClaw Latching System
- Choice of Colours
- Optional Cubed Foam Interior
- Fully Custom Internal Panels
- Military Approved
- Lifetime Warranty
The Nanuk 909-DJI-MM
is used in a wide range of industries for a broad range of rugged applications. The most common applications for the Nanuk 909-DJI-MM Rugged Case are listed below:-
These are just some of the applications for the Nanuk 909-DJI-MM Rugged Case The potential applications extend further than those shown above. For further information about the Nanuk 909-DJI-MM Rugged Case
or to check if the product is suitable for your application, please do not hesitate to contact us.
- Computer Consoles
- Marine Consoles
- Medical Consoles
- Miltary Consoles
- Mobile Worker
With our highly trained in house technical team and strong relationship with our manufacturers, we can offer numerous options and configurations for the Nanuk 909-DJI-MM Rugged Case to suit your requirements. These options include:
If your application requires unusual or individual modifications not listed above for the Nanuk 909-DJI-MM Rugged Case, please contact us with your exact requirements and we will help create a custom solution to meet your needs.
- Custom Logo
- Case Colour
- Laser Etching
- Custom Internal Panels
- Custom Printing
- Custom Foam Interior
The Nanuk 909-DJI-MM Rugged Case has a Conditional Lifetime Guarantee against defects in workmanship and materials from the date of shipment, (unless otherwise agreed in writing)
To obtain service under this warranty, the warranty-eligible product, Nanuk 909-DJI-MM Rugged Case, must be presented to us here in the UK.
For further information on the above or for repairs and service outside the the scope of warranty, please visit the warranty section of our webiste.